Product Information
Non-water soluble cutting oils
Product name |
JIS standard
|
Viscosity
(@40)
cSt |
Flash point
(C.O.C.)
|
Copper corrosion
100 1h |
Fire Service Law classification |
Application/Characteristics |
A-92B
|
N2-4 |
18.32
|
170
|
1b
|
3rd class petroleum |
Suitable for gear cutting, endmill, milling, and automatic lathe operations. Suitable for heavy-duty cutting on non-ferrous metals.
|
B-190
|
N3-8 |
19.96
|
160
|
1b
|
3rd class petroleum |
Suitable for tapping (including forming tap), threading,
broaching and reaming operations on steels. Applicable to non-ferrous metals. However, cleaning is
required after machining.
|
B-193
|
N3-8 |
42.17
|
180
|
1b
|
3rd class petroleum |
High viscosity type of B-190. Application is the same as B-190.
|
B-11
|
N4-6 |
8.90
|
146
|
3b
|
3rd class petroleum |
Suitable for gun drilling and small-size tapping operations
on steels.
|
B-50A
|
N4-7 |
20.40
|
180
|
4a
|
3rd class petroleum |
Suitable for tapping operation of general nuts. Suitable for numerical control lathe and machining center
operations.
|
B-52L
|
N4-8 |
19.86
|
180
|
4a
|
3rd class petroleum |
Suitable for tapping, broaching and reaming operations on
steels. Strengthened type of B-50A.
|
B-193M
|
N4-8 |
31.20
|
168
|
4a
|
3rd class petroleum |
Suitable for cutting operations under low cutting speed and
heavy-duty cutting on steels and stainless steels. Suitable for forming tap operations on steels very
well. Strengthened type of B-52L.
|
MB-A
|
N4-7 |
29.06
|
over180
|
4a
|
3rd class petroleum |
Suitable for cutting operations on hard-to-cut materials.
|
Cutting oils for automatic lathes
Characteristics of cutting oils for automatic lathes of Shincool:
EExcellent cooling performance.
EHigh-speed machining is possible.
EShortening of cycle time is possible.
EDimensional accuracy is improved.
Product Name
|
JIS standard
|
Viscosity
(@40)
cSt |
Flash point
(C.O.C.)
|
Copper corrosion
100 1h |
Fire Service Law classification |
Work materials apply |
SUS
304 |
SUS
303 |
Alloy steel |
S-45C
|
Free-cutting steel
|
Non-
ferrous
metal |
Raw material
|
Temper material
|
MA-30A
|
N2-4 |
19.30
|
178
|
1a
|
3rd class petroleum |
~
|
|
|
|
|
|
|
MA-38B
|
N2-4 |
24.40
|
188
|
1a
|
3rd class petroleum |
|
|
|
|
|
|
|
MA-4A-5
|
N2-4 |
24.32
|
176
|
1a
|
3rd class petroleum |
|
|
|
|
|
|
|
MA-5A-9
|
N2-4 |
28.05
|
178
|
1a
|
3rd class petroleum |
|
|
|
|
|
|
|
@
Water soluble cutting fluids
Product Name |
JIS standard
|
Appearance
(Diluted solution)
|
Viscosity
(@40)
cSt
(Undiluted solution)
|
pH
(20-times dilution)
|
Application/Characteristics |
ES-50
|
A1-2
|
Emulsion
|
119.90
|
9.69
|
Suitable for various machining operations on steels. Applicable to high pressure coolant system.
|
ES-80 |
A1-1 |
Micro-
emulsion |
167.47 |
9.26 |
Micro-emulsion type.
Suitable for heavy-duty cutting on steels and stainless steels . Typical long-life coolant with excellent anti-microorganism features. Applicable to high pressure coolant system.
Not applicable to non-ferrous metals.
|
ES-85B |
A1-2 |
Emulsion |
95.55 |
9.56 |
Suitable for machining operations on various work materials
(non-ferrous metals, steels and stainless steels).
Also suitable for tapping and threading on steels.
Excellent anti-microorganism features. |
ES-402 |
A1-2 |
Emulsion |
44.77 |
8.94 |
Suitable for machining operations on ferrous metals. Excellent anti-microorganism features.
|
ES-103
|
A2-1 |
Soluble
|
6.00
|
9.50
|
Suitable for cutting and grinding on steels.
|
ES-70B |
A2-2 |
Soluble
|
104.10 |
8.92 |
Suitable for machining operations on various work materials
(non-ferrous metals, steels and stainless steels).
|
US-52 |
A2-1 |
Soluble
|
1.32 |
9.25 |
Suitable for light-duty cutting operations on steels. Suitable for band saw machine.
|
US-108 |
A2-1 |
Soluble
|
16.27 |
10.13 |
Suitable for tapping, threading and reaming operations on steels.
|
ES-40H
|
A3-1 |
Solution
|
3.74
|
9.32
|
Suitable for cutting and grinding operations on steels.
|
ES-43H
|
A3-2 |
Solution |
30.88
|
9.06
|
Strengthened type of ES-40H. Also applicable to non-ferrous metals.
|
Tanoi-Shincool 99X-series
"Tanoi-Shincool
99X" series metal-working lubricants introduced hereinafter in this
catalog are the first-rate metal-working lubricants for use in
manufacturing in a variety of threading parts, and these series have
been developed under an extensive period of research and development
with full cooperation of Tanoi manufacturing company.
Product name
|
JIS standard |
Viscosity
(@40)
cSt |
Flash point
(C.O.C.)
|
Copper corrosion
100 1h |
Fire Service Law classification |
Application/Characteristics
|
99X
-Super
|
N3-8
|
19.96
|
160
|
1b
|
3rd class petroleum |
Suitable for forming tap (small sizes) operations on
steels. Chlorine-free.
Recommended oil for turret punch press machine by Amada
company.
Applicable to non-ferrous metals. However, cleaning is
required after machining.
|
99X-AB
|
N4-8 |
31.20
|
168
|
4b
|
3rd class petroleum |
Suitable for forming tap (large sizes) operations on
steels. Chlorine-free. Also suitable for cutting operations under low cutting speed
and heavy-duty cutting.
|
99X-A |
| |
44.99
|
201
|
4b
|
4th class petroleum |
Suitable for various cutting operations on stainless steels. Chlorine contained. 4th class petroleum. |
99X-B |
| |
19.64
|
170
|
1a
|
3rd class petroleum |
Suitable for various cutting operations on stainless
steels. Chlorine contained. Applicable to non-ferrous metals. However, cleaning is required after machining.
|
99X-4AN |
| |
19.88
|
170
|
1b
|
3rd class petroleum |
Suitable for thread-rolling and automatic lathe operations
on stainless steels. Chlorine contained. Applicable to non-ferrous metals. However, cleaning is required after machining.
|
NP-1 |
| |
1.28 |
60 |
1a |
2nd class
petroleum
|
Quick volatilizing low viscosity press forming oil. Applicable to non-ferrous metals.
|
Tanoi Paste (semi-solid type metal-working lubricants)
ESuitable for tapping, drilling, reaming and threading operations.
EIn particular, these are quite useful in the operations on hard-to-cut materials such as
stainless steels.
ESo pasty at room temperature, there is no dripping, suitable for such as horizontal drilling
operations very well .
Product name |
Characteristics
|
Tanoi Paste
|
All season type. Chlorine-free.
|
Tanoi Paste-CF
|
Strengthened type of Tanoi Paste. Chlorine-free.
|
Tanoi Paste-EX
|
Strengthened type of Tanoi Paste. Chlorine contained.
|
Non-water soluble grinding oils
Product name
|
Viscosity
(@40)
cSt
|
Flash point
(C.O.C.)
|
Copper corrosion
100 1h
|
Fire Service Law classification
|
Application/Characteristics
|
CIRCLENE
90FG-10
|
21.76
|
over210
|
1a
|
4th class petroleum |
Gear grinding oil. Recommended oil by Gleason Works U.S.A.
|
SHINCOOL
FG-5
|
6.48
|
150
|
1a
|
3rd class petroleum |
Special oil for grinding operation by diamond grinding wheel. Low viscosity grinding oil.
|
SHINCOOL
FG-20
|
39.91
|
over210
|
1a
|
4th class petroleum |
Flute grinding oil for small cutting tools such as drill, tap end-mill, etc.
|
SHINCOOL
FG-21
|
21.76
|
over210
|
1a
|
4th class petroleum |
Low viscosity type of FG-20. |
Cold heading oils
Sold by: SAKAMURA MACHINE CO.,LTD
Product name
|
Viscosity
(@40)
cSt
|
Flash point
(C.O.C.)
|
Copper corrosion
100 1h |
Fire Service Law classification |
Application/Characteristics |
CF-204A
|
24.59
|
168
|
1b
|
3rd class petroleum |
Specialized in forming socket-screw bolts of alloy steels.
|
CF-250A
|
35.23
|
178
|
1b
|
3rd class petroleum |
Strengthened type of CF-204A. Specialized in forming socket-screw bolts of both alloy steels
and SUS XM-7.
|
CF-350A
|
40.60
|
184
|
1b
|
3rd class petroleum |
Strengthened type of CF-250A. Specialized in forming socket-screw bolts of SUS XM-7 and can be also
applicable to forming some stainless steels.
|
CF-450A
|
48.88
|
174
|
1b
|
3rd class petroleum |
Specialized in forming any parts with either hollow or high reduction
rate in diameter performed on both alloy steels and stainless steels.
|
CF-ALH
|
58.06
|
208
|
1b
|
4th class petroleum |
General]purpose type. Applicable to forming on carbon steels, alloy steels and SUS XM-7.
|
Copyright SHINCOOL CO.,LTD All Right Reserved.
|